EMERGENCY SERVICE AVAILABLE
Local Kenmore Refrigerator Repair in Springdale AR
Elite 795, 106, 253, and Coldspot units serviced by Springdale technicians who identify the real manufacturer from your model number before quoting parts, backed by 15 years of appliance repair experience.
15+
Years Service
500+
Repairs Done
9+
Brand Covered
2400+
Happy Homes
Same-Day Service
Most repairs same day
Licensed Techs
Warranty Backed
Transparent Pricing
━ WHAT WE FIX
What Fails Most on Kenmore Refrigerators
A Kenmore fault depends on who built it. We match the symptom to the platform underneath instead of treating every Kenmore the same.
Elite 795 Cooling Loss
Elite 795 units are LG-built. When they stop cooling while the fans still run, we test the sealed system and compressor circuit first.
Check My Elite
106 Series Defrost Circuit
Whirlpool-built 106 models rely on a defrost heater, bimetal, and board. Frost on the back wall usually means one of the three failed.
Grab-N-Go Door Faults
The Grab-N-Go panel adds a second door seal and hinge set. Misalignment there causes frost, condensation, and long run times.
Coldspot Temperature Swings
Older Coldspot units drift as the cold control or thermistor ages. We measure the control against spec instead of replacing on a hunch.
Steady My Temps
Discontinued Parts Sourcing
Sears-branded parts are scarce, but the OEM equivalents are not. We cross-reference the Kenmore number to the original manufacturer part.
Find My Part
Mixed-Platform Control Boards
A Kenmore board may be Whirlpool, LG, or Samsung underneath. We test to the correct schematic before condemning an expensive board.
━ MODELS WE REPAIR
Kenmore Series and Who Actually Builds Them
Kenmore badges refrigerators built by several manufacturers. The prefix on your model number tells us whose platform, wiring, and parts we are working with.
Kenmore Elite 795 (LG-Built)
Elite 795 models use LG sealed systems, linear compressors, and LG control logic, so they are diagnosed with LG service data.
Kenmore 106 (Whirlpool-Built)
The 106 prefix means a Whirlpool platform, with adaptive defrost, familiar ice maker assemblies, and widely available parts.
Kenmore 253 (Frigidaire-Built)
253 units come from Frigidaire and Electrolux lines, using their damper, drain, and dispenser hardware rather than Whirlpool parts.
Kenmore 401 and 363 Models
401 units are Samsung-built and 363 units are GE-built, each with their own boards, sensors, and ice-system quirks to test.
━ HOW IT WORKS
Diagnosing a Kenmore Starts With the Model Number
Every Kenmore repair begins with the prefix, because it decides which schematic, error-code table, and parts catalogue actually apply.
01
Decode the Model Prefix
We read the full model and serial plate, then use the first three digits to identify which manufacturer actually built the unit.
02
Pull the OEM Service Data
We work from the original manufacturer tech sheet, not a generic Kenmore guide, so error codes and test points are correct.
03
Test the Actual Platform
Sealed system, defrost circuit, sensors, and controls are tested the way that manufacturer specifies for the platform underneath.
04
Confirm the Right Part
We cross-reference the Kenmore part number to its OEM equivalent, confirm fitment, then verify cooling and cycle times after fitting.
15+
YEARS SERVICE
15 Years of Kenmore Repairs in Northwest Arkansas
Kenmore is the brand most often misdiagnosed, because the badge on the door says nothing about what is inside. One Kenmore Elite can be an LG underneath while the Kenmore beside it is a Whirlpool. Fifteen years in Northwest Arkansas taught us to read the model prefix first and work from the correct schematic.
Springdale homeowners get the real builder identified, the fault explained in plain language, and OEM part numbers cross-referenced so nothing is ordered twice. Older Coldspot and Elite units also get an honest opinion on whether the repair is worth the age of the unit.
Same-Day Appointments
Factory-Certified Techs
Warranty-Backed Work
Upfront Flat-Rate Pricing
15+
YEARS
EXPERIENCE
500+
REPAIRS DONE
90+
━ Customer Reviews
Trusted by Homeowners Across Springdale
Real reviews from real Springdale customers. Fast response, fixed on first visit, transparent pricing – every time.
Start Your Kenmore Repair
Send the full model number from the plate inside the fresh-food section, plus what the unit is doing, and we will identify the builder before the visit.
━ Common Issues
Kenmore Refrigerator Repair Questions
Still Have Questions?
Who Actually Makes Kenmore Refrigerators?
Kenmore does not manufacture refrigerators. It is a Sears house brand, and each unit is built by another manufacturer, most commonly Whirlpool, LG, Frigidaire and Electrolux, Samsung, or GE. The first three digits of the model number identify the builder, which is why we ask for it before quoting any part.
What Do The First Three Digits Of My Kenmore Model Number Mean?
The first three digits of a Kenmore model number identify the factory that built it. 106 is Whirlpool, 795 is LG, 253 is Frigidaire and Electrolux, 401 is Samsung, and 363 is GE. Once we know the prefix we can pull the correct tech sheet, error-code table, and OEM part numbers instead of guessing.
Can Kenmore Refrigerators Still Be Repaired Now That Sears Has Closed?
Yes. Sears closing affected the retailer, not the parts. Because Kenmore units are built by Whirlpool, LG, Frigidaire, Samsung, and GE, most components are still available under the original manufacturer part number. We cross-reference the Kenmore number to its OEM equivalent, which is usually cheaper and easier to source than a Sears-branded part.
Do You Service Kenmore Elite And Coldspot Models?
Yes. We service Kenmore Elite, Kenmore Coldspot, and standard Kenmore refrigerators in top-freezer, bottom-freezer, side-by-side, and French-door layouts. That covers Elite 795 sealed systems, 106 defrost circuits, Grab-N-Go doors, ice makers, dispensers, and control boards. Send the full model number so we can confirm the platform before the visit.
How Much Does Kenmore Refrigerator Repair Cost In Springdale?
Kenmore repair pricing depends on the failed part and on which manufacturer built the unit, because parts pricing varies by OEM. A defrost thermostat or door gasket is inexpensive, while an Elite 795 sealed-system repair costs considerably more. We identify the builder from the model number, diagnose onsite, and quote before starting.